1======================================================================
2 Simple LayoutViewer for CTR
3                                                           2010/07/29
4======================================================================
5
6Contents
7 - Introduction
8 - Operating Environment
9 - Setup Method
10 - Usage
11 - Precautions
12
13======================================================================
14 Introduction
15======================================================================
16Simple LayoutViewer for CTR is a provisional tool used to check layouts on actual CTR hardware.
17
18======================================================================
19 Operating Environment
20======================================================================
21OS         : Microsoft Windows XP Professional Service Pack 3 (32-bit)
22                 Microsoft Windows 7 Professional (64-bit)
23Runtime    : Microsoft .NET Framework 3.5 SP1
24Debugger   : PARTNER -CTR Debugger Software
25               : PARTNER-CTR HIO-Daemon
26Firmware: CTR-SDK 0.13 SystemUpdater
27
28======================================================================
29 Setup Method
30======================================================================
31Run the setup.wsf file located in the NintendoWare\CTR folder.
32Set the environment variable NW4C_ROOT to the NintendoWare\CTR folder.
33
34======================================================================
35 Using the Tool
36======================================================================
371. Be sure to start this tool while PARTNER-CTR HIO-Daemon is not running.
38
39    Note: HIO-Daemon and LayoutEditor must be restarted if the environment variable NW4C_ROOT has been set or has been changed.
40           (This includes cases in which NW4C setup.wsf has been executed.)
41
42２. Execute %NW4C_ROOT%\tools\LayoutEditor\LayoutViewer.bat.
43
44    The PARTNER-CTR debugger software will start and Simple LayoutViewer will execute on the actual CTR hardware.
45
46    Note: If PARTNER-CTR debugger software is already running, that software will be terminated.
47
483. The layout file to be displayed using LayoutEditor is transferred to Simple LayoutViewer.
49
50    - Select Tools > Target viewer > Actual hardware viewer from the menu.
51    - Select Tools > Transfer to viewer (V) from the menu.
52
53    Note: HIO-Daemon and LayoutEditor must be restarted if the environment variable NW4C_ROOT has been set or has been changed.
54           (This includes cases in which NW4C setup.wsf has been executed.)
55
564. The specified layout will be displayed on the upper or lower screen.
57
58    When the layout is displayed, a menu will appear on the other screen. This menu allows you to operate animations, groups, projection types, and stereoscopic view.
59
60    Operations are as follows:
61
62        Up/Down Key:   Navigate menu
63        Left/Right Key:   Menu Item Operations
64        A Button:   Play/stop animation.
65        B Button:   Rewind frames
66        L Button:   Hides the simple menu while held down.
67        R Button:   Switches the screen used for display between the upper and lower screen.
68
69======================================================================
70 Notes
71======================================================================
72- There is no support for viewing multiple layouts.
73  Operation becomes unstable when you load multiple models.
74
75