1<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
2<html> <head>
3<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
4<meta http-equiv="Content-Style-Type" content="text/css">
5<link href="../../../css/manpage.css" rel="stylesheet" type="text/css">
6
7<title>UIC-MIDI</title>
8</head>
9<body>
10
11<h1 id="ADV_UIC-MIDI">UIC-MIDI</h1>
12<h2>What is UIC-MIDI?</h2>
13
14<h3>PARTNER-CTR UIC-MIDI</h3>
15<p>PARTNER-CTR UIC-MIDI (henceforth referred to as simply UIC-MIDI) is the interface for communications between a PC and a test unit and other CTR development hardware via USB connections. The device also has a MIDI-IN terminal for connection of MIDI devices.</p>
16<p>It comes with a built-in flash card with the same memory capacity as a 16 Gbit CTR Flash Card.</p>
17<ul>
18  <li>CCI files can be written to this flash card and executed on test units and other CRT development hardware.</li>
19  <li>The device does not have a built-in CTR Sub-card, but you can  open the case and install one</li>
20</ul>
21<blockquote>
22  <p><B>Note</B>: For details, see the setup manual that comes bundled with the UIC-MIDI.</p>
23</blockquote>
24<p>UIC-MIDI can be used for the following purposes:</p>
25<ul>
26  <li>For MIDI previewing in combination with the PARTNER-CTR Debugger or the CaptureDebugger.</li>
27  <li>For MIDI previewing and sound previewing in combination with a CTR test unit.</li>
28</ul>
29<p><strong>By combining the UIC-MIDI with a CTR test unit, you can prepare various preview playback environments for sounds without using PARTNER-CTR Debugger (CaptureDebugger).</strong></p>
30
31<h2>How to use the UIC-MIDI</h2>
32
33<h3>Preparation</h3>
34<p>To use the UIC-MIDI, first install the PARTNER-CTR UIC-MIDI USB driver.  (Refer to the PARTNER-CTR UIC-MIDI setup manual.)</p>
35
36<h3>MIDI preview playback using PARTNER-CTR Debugger and UIC-MIDI</h3>
37<ol>
38  <li>Provide a power supply to the UIC-MIDI by attaching an AC adapter or a USB cable connected to a PC </li>
39  <li>Attach a MIDI cable to the UIC-MIDI that can connect to MIDI  devices.</li>
40  <li>Connect the UIC-MIDI to a PARTNER-CTR Debugger or a CaptureDebugger.</li>
41  <li>Use the PARTNER-CTR software to load and execute <CODE>SoundPlayer-TS.cci</CODE>.</li>
42  <li>Display the <B>Preview Bank</B> screen and load the pertinent banks.</li>
43  <li>Send a Note-On signal with the MIDI device and confirm that the loaded banks can play.</li>
44</ol>
45
46<h3>MIDI preview playback using a CTR test unit and UIC-MIDI</h3>
47<ol>
48  <li>Write <CODE>SoundPlayer-TS.cci</CODE> to the UIC-MIDI.
49    <ul>
50      <li>You can write using PARTNER-CTR Debugger / CaptureDebugger just like you would to a normal CTR flash card.</li>
51      <li><strong>To write to the UIC-MIDI you need to provide a power supply by attaching an AC adapter or a USB cable connected to a PC.</strong></li>
52    </ul>
53  </li>
54  <li>Attach a MIDI cable to the UIC-MIDI that can connect to MIDI  devices.</li>
55  <li>Attach the AC adapter to the UIC-MIDI (for power supply).</li>
56  <li>Attach the UIC-MIDI to the CTR test unit.</li>
57  <li>Display the <B>Preview Bank</B> screen and load the pertinent banks.</li>
58  <li>Send a Note-On signal with the MIDI device and confirm that the loaded banks can play.</li>
59</ol>
60
61<h3>Sound preview playback using a CTR test unit and UIC-MIDI</h3>
62<ol>
63  <li>Write <CODE>HioSoundPlayer.cci</CODE> to the UIC-MIDI.</li>
64  <li>Attach the UIC-MIDI to a USB cable connected to a PC.</li>
65  <li>Attach the AC adapter to the UIC-MIDI (for power supply).</li>
66  <li>Attach the UIC-MIDI to the CTR test unit.</li>
67  <li>Use PARTNER-CTR Debugger or  CaptureDebugger to check that you can play sounds and load sound archives, operating them just like HioSoundPlayer.</li>
68</ol>
69<p><br>
70</p>
71<hr><p>CONFIDENTIAL</p></body> </html>
72