Config is a configuration program for CTR that can be used for such things as calibrating the touch panel and analog stick, and setting the system clock.
| Button | Operation |
|---|---|
| ↑↓ | Navigate menu |
| A | Select / Run |
| B | Back / Cancel |
Initializes all settings. Settings are reset to their initial (default) values on the next reboot.
On first startup, initialize the settings and then configure them as needed.
| Button | Operation |
|---|---|
| X | Execution |
| B | Cancel |
Calibrates the touch panel and analog stick.
| Button | Operation |
|---|---|
| A | Execution |
| B | Back / Cancel |
To calibrate the touch panel, use the stylus to touch the + marks in sequence on the lower screen. Touch the + mark twice to complete the calibration process and save the calibrated settings.
To calibrate the analog stick, slowly move the stick around in the biggest circle possible. Finally, press the A Button to complete the calibration process and save the calibrated settings. If you move the analog stick too quickly or if the circle motion is not complete, calibration will fail.
Configures the system clock.
| Button | Operation |
|---|---|
| ←→ | Navigate configuration items |
| ↑↓ | Adjust date and time |
| A | Set |
| B | Cancel |
Configures the LCD flicker adjustment and backlight settings.
| Button | Operation |
|---|---|
| ↑↓ | Move between settings / Change setting values |
| A | Select |
| B | Back |
Displays a calibration image (vertical black and white stripes) covering the entire screen that you want to calibrate. Adjust the value so that the calibration image does not flicker. If the image appears to flicker, the flicker setting needs adjustment.
Enables/disables the active backlight.
Sets screen brightness to one of five levels. The larger the number, the brighter the setting.
Configures the user information.
| Button | Operation |
|---|---|
| ↑↓ | Move between settings / Change setting values |
| A | Select / Confirm |
| B | Back / Cancel |
| Touch panel | User name input |
Allows you to input a user name via a software keyboard. You can only input single-byte alphanumeric characters.
Toggles the user name profanity flag.
Configures other settings.
| Button | Operation |
|---|---|
| ↑↓ | Move between settings / Change setting values |
| A | Select |
| B | Back |
Selects between monaural, stereo, and 3D surround sound for the sound output mode.
This is an internal setting. Do not change it. Its value is MODE_2 by default.
Tests the calibration and checks the settings.
| Button | Operation |
|---|---|
| A | Start |
| B | End |
Configures the EULA settings.
| Button | Operation |
|---|---|
| ↑↓ | Move between settings / Change setting values |
| A | Select / Confirm |
| B | End |
Changes and then restores some of the stereo camera calibration values.
| Button | Operation |
|---|---|
| ↑↓ | Move between settings |
| A | Select / Confirm |
| B | End |
Reads a settings file from an SD Card and uses this to configure the owner information, EULA, and Parental Controls.
| Button | Operation |
|---|---|
| ←→ | Switches the Result display pages. |
| A | Confirm |
| B | Back |
ctrsetting.txt) is located in the $CTR-SDK/resources/configtool/ directory.Do not change the name of the settings file. Any change to the format of the settings file prevents proper configuration.
Once configuration completes, the configuration results are shown on the lower screen. [o]: Configuration completed normally. [x]: The system could not be configured, possibly because the information in the settings file was invalid.[-]: The settings file did not contain a value specification for the particular item.
CONFIDENTIAL